本篇文章给大家谈谈c++游戏编程代码大全，以及c++游戏代码简单对应的知识点，希望对各位有所帮助，不要忘了收藏本站喔。
本文目录一览：
关于用C语言编写的小游戏的游戏代码，如黑白棋贪吃蛇等
我这儿有c语言的自写俄罗斯方块，请指教：#include
#include
#include
#include
#include
#include
#include
#define ESC 0x011b
#define UP 0x4800
#define DOWN 0x5000
#define LEFT 0x4b00
#define RIGHT 0x4d00
#define SPACE 0x3920
#define Y 0x1579
#define N 0x316e
#define clearkbd(); while(bioskey(1)) bioskey(0); /*清空键盘缓冲队列*/
void update();
void messagebox();
void process();
void initremove();
void initinfo();
void initbox();
void initposition();
void next_shape();
typedef struct shape /*形状单一状态的记录*/
{ int attr;
int co[8];
}shape;
typedef struct RE_AB /*相对,绝对坐标记录*/
{ int Rx,Ry;
int x1,x2,y1,y2;
}RE_AB;
RE_AB RA;
shape p[19]={ { RED,0,1,1,0,1,1,2,1 }, /*数组中保证y最大的在最后，以便initposition使用*/
{ RED,0,1,1,0,1,1,1,2 },
{ RED,0,0,1,0,2,0,1,1 },
{ RED,0,0,0,1,1,1,0,2 },
{ GREEN,0,0,1,0,2,0,3,0 },
{ GREEN,0,0,0,1,0,2,0,3 },
{ CYAN,0,0,0,1,1,0,1,1 },
{ BROWN,0,0,1,0,1,1,2,1 },
{ BROWN,1,0,0,1,1,1,0,2 },
{ BLUE,1,0,2,0,1,1,0,1 },
{ BLUE,0,0,0,1,1,1,1,2 },
{ MAGENTA,0,0,0,1,0,2,1,2 },
{ MAGENTA,2,0,0,1,1,1,2,1},
{ MAGENTA,0,0,1,0,1,1,1,2 },
{ MAGENTA,0,0,0,1,1,0,2,0 },
{ YELLOW,0,2,1,0,1,1,1,2 },
{ YELLOW,0,0,1,0,2,0,2,1 },
{ YELLOW,1,0,0,0,0,1,0,2},
{ YELLOW,0,0,0,1,1,1,2,1 },
};
int nback,nleft,nright,r_f[12][22],rs1,rs2,xcors,xcorb,ycors,ycorb;
/*检查方快有没有左,右,下接触,游戏区内所有格子有无颜色记录数组,rs1形状记录,rs2为提示框用,记录小格子在游戏区中的位置,按键存储*/
void interrupt (*oldint)(); /*系统定时中断*/
int count_down=0,count_other=0; /*中断记时*/
void interrupt newint() /*设置新的中断程序*/
{ count_down++;
count_other++;
oldint();
}
void intenable() /*设置中断向量表，启动新的中断程序*/
{ oldint=getvect(0x1c);
disable();
setvect(0x1c,newint);
enable();
}
void intrestore() /*恢复中断向量*/
{ disable();
setvect(0x1c,oldint);
enable();
}
void HZ12(int x0,int y0,int w,int color,char *s) /*根据字模,在dos下显示汉字*/
/*横坐标,纵坐标,字间隔,汉字颜色,汉字字符串*/
{ FILE *fp;
register char buffer[24];
register char str[2];
unsigned long fpos;/*fpos为最终偏移动量*/
register int i,j,k;
fp=fopen(hzk12,r);/*打开12*12汉字苦*/
while(*s)/*一直到字符串结束为止*/
{
if(*s0)/*汉字输出*/
{ str[0]=(*s)-0xa0;
str[1]=*(s+1)-0xa0;
fpos=((str[0]-1)*94+(str[1]-1))*24L;/*计算汉字在hzk12的偏移量*/
fseek(fp,fpos,SEEK_SET);/*指针移动到当前位置*/
fread(buffer,24,1,fp);/*读取一个汉字到数组中*/
for(i=0;i12;i++)/*12行*/
for(j=0;j2;j++)/*两个字节*/
for(k=0;k8;k++)/*8位*/
if (((buffer[i*2+j](7-k))0x1)!=NULL)/*是一就画点*/
putpixel(x0+8*j+k,y0+i,color);
s+=2;/*一个汉字占两个字节，现在将指针移动两个字节*/
x0+=w;/*显示坐标也按照间隔移动*/
}
else/*显示非汉字字符*/
{ settextstyle(0,0,1);
setcolor(color);
str[0]=*s;str[1]=0;
outtextxy(x0,y0+3,str);/*显示单个字符*/
x0+=w-7;/*显示单个字符后的x坐标变化*/
s++;/*指针移动到下一个字节*/
}
}
fclose(fp);
}
void translation() /*把相对坐标解释为绝对坐标*/
{ if(RA.Rx==1)
{ RA.x1=1; RA.x2=16; }
else
{ RA.x1=16*(RA.Rx-1); RA.x2=16*RA.Rx; }
if(RA.Ry==1)
{ RA.y1=1; RA.y2=16; }
else
{ RA.y1=16*(RA.Ry-1); RA.y2=16*RA.Ry; }
}
int check_b() /*检查是否到达低部*/
{ int x,y,i,zf=0; /*zf为是否有颜色填充记录*/
for(i=0;i7;i++,i++)
{ x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y=6)
zf+=r_f[x-15][y-6+1];
}
if(zf==0)
return 1;
else
return 0;
}
int finish()
{ int tfull=0,i; /*判断顶层空间是否有填充*/
for(i=1;i11;i++)
tfull+=r_f[i][1];
if(tfull!=0)
return 1; /*告诉judge()可以结束了*/
}
int check_l() /*检查形状是否与左接触*/
{ int x,y,i,zf=0;
for(i=0;i7;i++,i++)
{ x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y6)
zf+=r_f[x-15-1][y-6];
if(y=6x==16)
zf+=1;
}
if(zf==0)
return 1;
else
return 0;
}
int check_r() /*检查形状是否与右接触*/
{ /*zf为是否有颜色填充记录*/
int x,y,i,zf=0; /*zf为是否有颜色填充记录*/
for(i=0;i7;i++,i++)
{
x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y6)
zf+=r_f[x-15+1][y-6];
if(y=6x==25)
zf+=1;
}
if(zf==0)
return 1;
else
return 0;
}
void check_touch()
{ nback=check_b();
nleft=check_l();
nright=check_r();
}
void draw(int cb) /*画形状,cb=1以填充色画形状，cb=2以背景色画形状,cb=3以白色画形状*/
{ int i,recordx=RA.Rx,recordy=RA.Ry;
for(i=0;i7;i++,i++)
{ RA.Rx+=p[rs1].co[i];
RA.Ry+=p[rs1].co[i+1];
if(RA.Ry=6)
{ RA.Rx=recordx;
RA.Ry=recordy;
continue;
}
translation();
if(cb==1)
setfillstyle(1,p[rs1].attr);
else
if(cb==2)
setfillstyle(1,BLACK);
else
if(cb==3)
{ setfillstyle(1,WHITE);
r_f[RA.Rx-15][RA.Ry-6]=1; /*置对应数组标记元素*/
}
bar(RA.x1+1,RA.y1+1,RA.x2-1,RA.y2-1);
RA.Rx=recordx;
RA.Ry=recordy;
}
}
void mov(int key) /*向下,左,右移动方块*/
{ draw(2);
if(key==LEFTnleft)
RA.Rx--;
else
if(key==RIGHTnright)
RA.Rx++;
else
RA.Ry++;
nback=check_b();
if(nback) /*判断形状有没有到达底部，有就将其颜色变为白色*/
draw(1);
else
draw(3);
}
void change() /*变换形状*/
{ int status=rs1,buffer,i,x,y,zf=0;
if(p[rs1].attr==p[rs1+1].attr)
rs1++;
else
while(p[rs1].attr==p[rs1-1].attr)
rs1--;
for(i=0;i7;i++,i++) /*检查变化形状后是否与已存形状发生冲突*/
{ x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y6)
zf+=r_f[x-15][y-6];
}
if(zf!=0)
rs1=status;
buffer=rs1;
rs1=status;
status=buffer;
draw(2);
buffer=rs1;
rs1=status;
status=buffer;
nback=check_b(); /*判断变化后的形状是不是到达了低部,这个检查是十分必要的*/
if(nback)
draw(1);
else
draw(3);
}
void accelerate()
{ if(count_down=1)
{ check_touch(); /*消除上一步动作对方块状态的影响*/
count_down=0;
if(nback) /*0表示到达底部,1表示没有到达*/
mov(DOWN);
}
}
void drawbox() /*画方块所在方框*/
{ int xcor,ycor;
for(xcor=xcors;xcor=xcorb;xcor++)
for(ycor=ycors;ycor=ycorb;ycor++)
{ if(xcor==xcors||xcor==xcorb||ycor==ycors||ycor==ycorb)
{ RA.Rx=xcor;
RA.Ry=ycor;
translation();
setfillstyle(1,DARKGRAY);
bar(RA.x1+1,RA.y1+1,RA.x2-1,RA.y2-1);
}
}
}
void erasure(int k)
{ int i,j,recordx=RA.Rx,recordy=RA.Ry;
{ j=k-1;
for(;j0;j--)
{ for(i=1;i11;i++)
{ r_f[i][j+1]=r_f[i][j];
RA.Rx=i+15;
RA.Ry=j+1+6;
translation();
if(r_f[i][j+1]==1)
setfillstyle(1,WHITE);
else
setfillstyle(1,BLACK);
bar(RA.x1+1,RA.y1+1,RA.x2-1,RA.y2-1);
RA.Rx=recordx;
RA.Ry=recordy;
}
}
}
}
void pause()
{ HZ12(450,400,15,BLACK,正常);
HZ12(450,400,15,GREEN,暂停);
for()
if(bioskey(1)bioskey(0)==SPACE)
{ clearkbd();
HZ12(450,400,15,BLACK,暂停);
HZ12(450,400,15,RED,正常);
return;
}
}
void judge()
{ int i,j,full=0; /*full等于10说明某一行满,该消除了*/
if(finish()) /*判断游戏是否该结束了*/
messagebox(); /*win编程里有这个函数*/
for(j=1;j21;j++) /*判断某一行是否满了*/
{ for(i=1;i11;i++)
full+=r_f[i][j];
if(full==10)
erasure(j); /*消除这行*/
full=0;
}
}
void update() /*使程序可以重新运行*/
{ cleardevice();
setbkcolor(BLACK);
initinfo(); /*提示信息初始化*/
initbox(); /*游戏框架初始化*/
srand((unsigned)time(NULL)); /*随机器函数的初始化*/
rs1=random(19);
rs2=random(19);
next_shape();
initposition(); /*方块最开始的出现位置*/
initremove(); /*记录每个方格有无颜色填充数组初始化*/
HZ12(450,400,15,RED,正常);
process();
}
void EXIT()
{ closegraph();
intrestore(); /*恢复中断向量*/
exit(0);
}
void initremove()
{ int i,j;
for(i=0;i12;i++)
for(j=0;j22;j++)
if(i==0||i==11||j==0||j==21)
r_f[i][j]=1;
else
r_f[i][j]=0;
}
void initinfo()
{ char aStr[2];
setcolor(RED);
outtextxy(450,100,This game's writer is:);
HZ12(450,140,15,RED,该程序作者:NULL);
outtextxy(525,110,NULL);
outtextxy(450,180,FUNCTION FOR KEYS:);
outtextxy(450,200,UP:change the shape);
outtextxy(450,210,DOWN:accelerate);
outtextxy(450,220,LEFT:move left);
outtextxy(450,230,RIGHT:move right);
outtextxy(450,240,ESC:exit this game);
outtextxy(450,250,SPACE:pause);
HZ12(450,260,20,RED,上:);
HZ12(450,280,20,RED,下:);
HZ12(450,300,20,RED,左:);
HZ12(450,320,20,RED,右:);
HZ12(450,340,20,RED,ESC:退出);
HZ12(450,360,15,RED,空格: 暂停/开始);
HZ12(450,380,15,RED,目前状态:);
HZ12(20,200,15,RED,下一个形状);
aStr[0]=24;
aStr[1]=0;
aStr[6]=0;
HZ12(480,260,12,GREEN,aStr);
HZ12(500,260,12,GREEN,( 变形 ));
aStr[0]=25;
aStr[1]=0;
HZ12(480,280,12,GREEN,aStr);
HZ12(500,280,12,GREEN,( 加速 ));
aStr[0]=27;
aStr[1]=0;
HZ12(480,300,12,GREEN,aStr);
HZ12(500,300,12,GREEN,向左);
aStr[0]=26;
aStr[1]=0;
HZ12(480,320,12,GREEN,aStr);
HZ12(500,320,12,GREEN,向右);
}
void messagebox()
{ int key;
setcolor(GREEN);
setfillstyle(1,DARKGRAY);
rectangle(220,200,420,300);
bar(221,201,419,299);
HZ12(280,210,15,GREEN,GAME OVER);
HZ12(275,230,15,GREEN,重新游戏: Y);
HZ12(275,270,15,GREEN,退出游戏: N);
HZ12(450,400,15,BLACK,正常);
HZ12(450,400,15,GREEN,GAME OVER);
for()
if(bioskey(1))
{ key=bioskey(0);
if(key==Y)
{ clearkbd();
update();
}
else
if(key==N)
{ clearkbd();
EXIT();
}
else
clearkbd();
}
}
void initbox()
{ xcors=15; /*画游戏框*/
xcorb=26;
ycors=6;
ycorb=27;
drawbox();
xcors=2; /*画提示框*/
xcorb=7;
ycors=6;
ycorb=11;
drawbox();
}
void initposition()
{ RA.Rx=18;
RA.Ry=6-p[rs1].co[7]
RA.x1=0;
RA.x2=0;
RA.y1=0;
RA.y2=0;
}
void next_shape() /*画下一形状提示框*/
{ int recordx=RA.Rx,recordy=RA.Ry,buffer;
RA.Rx=3;
RA.Ry=7;
draw(2);
buffer=rs1;
rs1=rs2;
rs2=buffer;
draw(1);
RA.Rx=recordx;
RA.Ry=recordy;
buffer=rs1;
rs1=rs2;
rs2=buffer;
}
void process() /*游戏过程*/
{ for()
{ check_touch();
if(!nback)
{ rs1=rs2;
rs2=random(19); /*产生另一种方块的码数*/
initposition();
judge(); /*判断某一行是否满了和这个游戏是否可以结束了*/
draw(1);
next_shape();
}
if(count_other=1)
{ count_other=0;
if(bioskey(1)) /*对按键的处理*/
{ int key=bioskey(0);
clearkbd(); /*清除键盘缓冲队列*/
if(key==ESC)
EXIT();
if(key==LEFTnleftnback)
mov(LEFT);
if(key==RIGHTnrightnback)
mov(RIGHT);
if(key==UPnback)
change();
if(key==SPACE)
pause();
if(key==DOWN)
accelerate();
}
}
if(count_down=4)
{ check_touch(); /*消除上一步动作对方块状态的影响*/
count_down=0;
if(nback) /*0表示到达底部,1表示没有到达*/
mov(DOWN);
}
}/*for*/
}
main()
{ int gdriver=DETECT,gmode=0;
initgraph(gdriver,gmode,d:turboc); /*启动图形与中断部分*/
intenable();
update();
}
用C语言编写的小游戏代码是什么？
“猜数字小游戏”，每个数字后按空格，最后按回车确认
#includestdio.h
#includestdlib.h
#includetime.h
int a[4],b[4];
int count=0; //计算猜测次数
void csh( ); //初始化
void start( ); //开始游戏
int main( )
{ csh( );
start( );
}
void csh( ) //初始化
{ printf("\n\n 猜 数 字 小 游 戏\n\n");
printf(“ 猜四个数字，如数字与顺序都正确记为A，数字正确位置不对记为B.\n”);
}
void start( ) //开始游戏
{int m,n; //m是完全猜对的个数,n是顺序不对的个数
while(1)
{srand((unsigned)time(NULL)); //初始化随机数发生器srand( )
while(1) { for(int i=0;i4;i++) a[i]=rand( )%10; //rand( )函数每次随机产生一个0-9的数
if( (a[3]!=a[2]a[3]!=a[1]a[3]!=a[0])
(a[2]!=a[1]a[2]!=a[0])a[1]!=a[0] ) break; } //4个随机数各自不相等
printf(" 请依次输入4个一位整数:\n\n ");
while(1)
{for(int i=0;i4;i++) scanf(“%d”,b[i]);
printf(" 你输入的是:%d %d %d %d ",b[0],b[1],b[2],b[3]);
m=0;n=0;
for(int i=0;i4;i++)
{for(int j=0;j4;j++)
{ if(b[i]==a[j]i==j)m=m+1; if(b[i]==a[j]i!=j)n=n+1; }
}
count=count+1;
printf(" %dA %dB 你试了%d次\n ",m,n,count);
if(m==4)break;
if(count==8){ count=0; break; }
}
printf("\n");
if(m==4)printf(" 你猜对了(^-^)！ 就是：%d %d %d %d\n",a[0],a[1],a[2],a[3]);
else printf(" 你输了(T-T)！哈哈！应该是:%d %d %d %d\n",a[0],a[1],a[2],a[3]);
int z;
printf(" （要继续吗？1或0）\n ");
scanf(“%d”,z);
if(z==0) break;
}
}
c语言游戏编程，下落的小鸟 求代码
下落的小鸟
#includestdio.h
#includestdlib.h
#includeconio.h
#includetime.h
#includeWindows.h
int Grade = 1, Score = 0, Max_blank = 9, Distance = 18;
struct Birds{int x; int y;}; //定义一种Birds数据类型(含3个成员)
Birds *Bird = (Birds*)malloc(sizeof(Birds)); //定义Birds类型 指针变量Bird并赋初值
struct Bg{int x, y; int l_blank; Bg *pri; Bg *next;}; //定义一种Bg数据类型(含5个成员)
Bg *Bg1 = (Bg*)malloc(sizeof(Bg)); //定义Bg类型 指针变量Bg1并赋初值
void Position(int x, int y) //光标定位函数(用于指定位置输出)
{COORD pos = { x - 1, y - 1 };
HANDLE Out = GetStdHandle(STD_OUTPUT_HANDLE);
SetConsoleCursorPosition(Out, pos);
}
void Csh( ) //初始化界面
{
printf("══════════════════════════════════════\n");
printf(" ■■ ■■ C语言版 Flappy Bird \n");
printf(" ■■ ■■\n");
printf(" ■■ ■■\n");
printf(" ■■ ■■ 瞎搞人：yyposs原创\n");
printf(" ■■ ■■ 瞎搞日期：2014.2\n");
printf(" ■■ ■■\n");
printf(" ■■ ■■ 改编：鸣蝉百2021.7\n");
printf(" ■■ ■■ 操作：按向上方向键让小鸟起飞\n");
printf(" ■■\n");
printf(" ■■\n");
printf(" ■■ ■■\n");
printf(" ■■ ■■\n");
printf(" ■■ ■■\n");
printf(" ■■ ■■\n");
printf(" ■■ ■■ DEVc++运行通过\n");
printf("══════════════════════════════════════\n");
printf(" 按键继续…");
getch( );
system("cls");
}
void PrFK( ) //输出方框(游戏范围区)
{int i;
Position(1, 1); printf("╔"); Position(79, 1); printf("╗");
Position(1, 24); printf("╚"); Position(79, 24); printf("╝");
for (i = 3; i = 78; i += 2){Position(i, 1); printf("═"); Position(i, 24); printf("═");}
for(i=2;i=23;i++)
{ Position(1,i); printf("║");if(i11)printf("0%d",i-1);else printf("%d",i-1);
Position(79,i); printf("║");
}
Position(4, 25); printf("小鸟即将出现，请准备按键起飞… ");
getch( );
Position(4, 25); printf(" ");
}
void CreatBg( ) //创建障碍物坐标(便于打印输出)
{Bg *Bg2 = (Bg*)malloc(sizeof(Bg));
Bg1-x = 90; Bg1-y = 8; //确定障碍物的一对基本坐标(此时值是在游戏框之外)
Bg2-x = Bg1-x + Distance; Bg2-y = 9; //下一障碍物的基本坐标x、y
Bg1-l_blank = Max_blank - Grade; //障碍物上下两部分之间的空白距离l_blank
Bg2-l_blank = Max_blank - Grade;
Bg1-next = Bg2; Bg1-pri = Bg2;
Bg2-next = Bg1; Bg2-pri = Bg1;
}
void InsertBg(Bg *p) //随机改变障碍物的y坐标，让空白通道有上下变化
{int temp;
Bg *Bgs = (Bg*)malloc(sizeof(Bg));
Bgs-x = p-pri-x + Distance;
Bgs-l_blank = Max_blank - Grade;
srand((int)time(0)); //启动随机数发生器
temp = rand( ); //产生一个随机数并赋值给temp
if (temp % 2 == 0)
{if ((temp % 4 + p-pri-y + Max_blank - Grade)21)
Bgs-y = p-pri-y + temp % 4;
else Bgs-y = p-pri-y;
}
else
{if ((p-pri-y - temp % 4)2)Bgs-y = p-pri-y - temp % 4;
else Bgs-y = p-pri-y;
}
Bgs-pri = p-pri; Bgs-next = p;
p-pri-next = Bgs; p-pri = Bgs;
}
void CreatBird( ) //建立小鸟的坐标(初始打印输出小鸟的位置)
{Bird-x = 41; Bird-y = 10;}
int CheckYN(Bg *q) //判断游戏结束与否(值为0是要结束，为1没有要结束)
{Bg *p = q; int i = 0;
while (++i = 5)
{if (Bird-y23)return 0;
if (Bird-x == p-xBird-y = p-y)return 0;
if ((Bird-x == p-x || Bird-x == p-x + 1 || Bird-x == p-x + 2) Bird-y == p-y)return 0;
if (Bird-x == p-xBird-yp-y + p-l_blank)return 0;
if ((Bird-x == p-x || Bird-x == p-x + 1 || Bird-x == p-x + 2) Bird-y == p-y + p-l_blank)
return 0;
p = p-next;
}
return 1;
}
void Check_Bg(Bg *q) //核查开头的障碍物坐标是否在游戏区内
{Bg *p = q; int i = 0, temp;
while (++i = 5)
{if (p-x-4)p = p-next;
else
{srand((int)time(0)); temp = rand();
if (temp % 2 == 0)
{if ((temp % 4 + p-y + Max_blank - Grade)21)p-y = p-y + temp % 4;
else p-y = p-y; p-x = p-pri-x + Distance;
p-l_blank = Max_blank - Grade;
}
else
{if ((p-y - temp % 4)2)p-y = p-y - temp % 4;
else p-y = p-y; p-x = p-pri-x + Distance;
p-l_blank = Max_blank - Grade;
}
}
}
}
void Prt_Bg(Bg *q) //打印输出障碍物(依据其x、y坐标进行相应输出)
{Bg *p = q; int i = 0, k, j;
while (++i = 5)
{if (p-x0 p-x = 78)
{for (k = 2; kp-y; k++){Position(p-x + 1, k); printf("■"); printf("■"); printf(" ");}
Position(p-x, p-y);
printf("■"); printf("■"); printf("■"); printf(" ");
Position(p-x, p-y + p-l_blank);
printf("■"); printf("■"); printf("■"); printf(" ");
k = k + p-l_blank + 1;
for (k; k = 23; k++){Position(p-x + 1, k); printf("■"); printf("■"); printf(" ");}
}
p = p-next;
if (p-x == 0)
{for (j = 2; jp-y; j++){Position(p-x + 1, j); printf(" "); printf(" ");}
Position(p-x + 1, p-y);
printf(" "); printf(" "); printf(" ");
Position(p-x + 1, p-y + Max_blank - Grade);
printf(" "); printf(" "); printf(" ");
j = j + Max_blank - Grade + 1;
for (j; j = 22; j++){Position(p-x + 1, j); printf(" "); printf(" ");}
}
}
}
void PrtBird( ) //打印输出小鸟
{Position(Bird-x, Bird-y - 1); printf(" ");
Position(Bird-x, Bird-y); printf("Ю");
Position(38, 2); printf("Score:%d", Score);
}
void Loop_Bg(Bg *q) //障碍物x坐标左移，并记录成绩
{Bg *p = q; int i = 0;
while (++i = 5)
{p-x = p-x - 1; p = p-next;
if (Bird-x == p-x)
{Score += 1;
if (Score % 4 == 0 Grade4)Grade++;
}
}
}
int main( )
{int i = 0; int t;
while (1)
{
Csh( );PrFK( );CreatBg( );
InsertBg(Bg1);InsertBg(Bg1);InsertBg(Bg1);
CreatBird( );
while (1)
{if (!CheckYN(Bg1))break;
Check_Bg(Bg1);Prt_Bg(Bg1);
PrtBird( );Loop_Bg(Bg1);
Bird-y = Bird-y + 1;
if (GetAsyncKeyState(VK_UP)) //按下了向上方向键
{Position(Bird-x, Bird-y - 1);printf(" ");
Bird-y = Bird-y - 4;
}
Sleep(200); //程序延时200毫秒(数值大小决定游戏速度快慢)
i = 0;
}
Position(6, 25);
printf("游戏结束! 请输入：0.退出 1.重玩");
scanf("%d",t);
if (t==0)break;
system("cls"); Score = 0;
}
return 0;
}
关于c++游戏编程代码大全和c++游戏代码简单的介绍到此就结束了，不知道你从中找到你需要的信息了吗 ？如果你还想了解更多这方面的信息，记得收藏关注本站。
